Purpose of a Forklift and How to Handle Them?

Published: 22nd April 2010
Views: N/A

Higher ramp area requires the use of fork lifts. It is risky to operate on steep heights and calls for a greater attention to details and must be taken care of easily. They may be used on flat surfaces and peak points. If you don't have a loading dock, you can make use of a ramp. These ramps will enable the machine to load stuff on to the truck.

Purpose of these forklifts are:

Be it a ware housing unit, factory or industrial set up, they will require a device to load and unload their materials. Fork lifts are used precisely for this purpose. Unload and loading merchandise at the industrial unit. It may be used in the construction site too. If it is building with multiple storeys, these machines are used to upload stuff on to the scaffoldings. If not for these machines it is highly difficult to carry heavy materials on to the elevated platform.

This can be easily maneuvered to different sides and storeys. The load of materials can be raised with the mast and is titled back to the cab slightly. It helps to control a lot of things in the job site. They are ideally designed to be compact so that it is easily portable and fits any space. If your job site is small, it still makes easy to store them in places with space constraint. Does not occupy more space unlike the trucks and lorries. One must be careful while negotiating an incline as it can be risky at times to tip over as they are small in size. Train the driver who operates these machines so that he knows how to take the right turns with out causing any damage.

Instead of securing the load to a hoist line using rigging, the load rest on forks maneuvered securely under the ground. Paths should be made and controlled around the jobsite for material movement by forklifts. There are two basic types of forklifts. Vertical mast forklifts require a relatively stable and flat lifting surface. The forklift positions perpendicular to the building after transporting the load to the placement location.

Do not stuff in too much on to the fork lifts. The problem augments when the forklift is loaded to capacity. Ramps provide the required gradual elevation needed by forklifts. Ramps are made from steel or aluminum and are coated with special anti corrosive paint. Generally, steel is preferred as it is cheaper than aluminum. Ramps can either be portable or fixed. A fixed ramp is used where goods are loaded on lorries and trucks. A portable ramp is used for loading on specific medium such as bogies of a goods train.

Kirthy Shetty, Platinum Author.
Get related information on Forklifts

More on Warehousing in India

Report this article Ask About This Article

More to Explore